Flap wheel Is our best wheels in daily industrial production often use one of the grinding tool, if notice at any time in the daily use and maintenance, so not only can prolong the using time of the wheel and also can avoid using process because a few small problems affect the normal production.

1. Because the gear of the flap wheel is not firmly fastened, it can not be synchronized with the page wheel. It is necessary to reassemble the gear, and the connection of the cone is 75%.

2. If there are purifying impurities on the flap wheel, and the gap is too small, just remove the dirt, and check whether the inner part is damaged or not, if there is damage, repair and replace it in time.

3, gear wear, the formation of large backlash is a common problem fan, especially the use of a longer blower, the gear wear more nervous, at this time it is necessary to adjust the gear gap, if the gear side gap is greater than the uniform value of 30% to 50% Replace gears.

4. The bearing wear of the flap wheel can lead to the increase of the clearance, and it is necessary to replace the bearing.

The so-called sharpener does not miss the woodwork, it takes a few minutes every day to check the relevant parts of the flap wheel before running, so as to ensure the smooth use of the day.

We have our own factory Jia County Yihong Abrasives Co.,Ltd and Henan Sanders Abrasives CO.,Ltd. They can provide abrasives including all kinds of modes what you want. More detail check our websites http://yhabrasives.com/ and www.sandersabrasive.com